Ford Falcon 1988-1994 EA, EB, ED

Headunit Installation Requirements

You will need

Facia - Single DIN : 

Not Required

Primary Harness: 

Required, may require a secondary harness

Additional Products

Antenna: 

Available
Images
About this Vehicle

Dates: 

Mar 1988 through Aug 1994

Manufacturer: 

  • Ford

Sub-Model: 

EA, EB, ED

Chassis Type: 

  • Sedan

Place of Origin: 

Australia

Tags: 

  • Ford
  • Falcon
  • Sedan
  • EA
  • ED
  • EB

Ford Falcon EA, EB, ED

The Ford Falcon is a full-size car which has been manufactured by Ford Australia since 1960. Each model from the XA series of 1972 onward has been designed, developed and built in Australia. The EA, EB, and ED were all offered as four door sedans and five door wagons.

This is the fifth generation Falcon, consisting of the EA produced from 1988 to 1991, with eight model variations.

The EB car was produced by the Ford Motor Company of Australia between 1991 and 1993. It replaced the Ford EA Falcon which had been in production since 1988. The first XR6 and XR8 sports models appeared in the EB Series

The ED was produced by Ford Australia from 1993 to 1994. It replaced the Ford EB Falcon and was an evolution of that model. The sports model ED XR6 and XR8.

Information provided by: http://en.wikipedia.org/wiki/Ford_ED_Falcon , http://en.wikipedia.org/wiki/Ford_EB_Falcon and http://en.wikipedia.org/wiki/Ford_EA_Falcon

Speaker Cavities
EA Model Front: 4"
EA Model Rear: 6"
EB/ED Model Front: 6"
EB/ED Model Rear: 6"