Mitsubishi Lancer 2007-2013 CJ

Headunit Installation Requirements

You will need

Facia - Single DIN : 


Facia - Double DIN: 


Steering Wheel Control Harness: 

Required, also requires radio brand specific patch lead

Primary Harness: 

Required, may require a secondary harness

Antenna Adaptor: 

Not Required

Additional Products

T Harness (for adding aftermarket bluetooth car kits): 


Manufacturers headunits can vary slightly for this vehicle, please select yours for best results:

2. Pre 2010

5. Rockford Fosgate MMCS

3. Post 2010

4. Rockford Fosgate

1. No Steering Wheel Controls

About this Vehicle


Jan 2007 through Jan 2013


  • Mitsubishi



Chassis Type: 

  • Hatchback
  • Sedan

Place of Origin: 



  • Lancer
  • Sedan
  • Hatchback
  • Mitsubishi

Mitsubishi Lancer

The Mitsubishi Lancer is a family car built by Mitsubishi Motors. It has been known as the Colt Lancer, Dodge/Plymouth Colt, Chrysler Valiant Lancer, Chrysler Lancer, Eagle Summit, Hindustan Lancer, Soueast Lioncel, Mitsubishi Carisma, and Mitsubishi Mirage in various countries at different times, and has been sold as the Galant Fortis in Japan since 2007.

The CJ Lancer was released in 2007, It is powered by a 4B11, 2.0-litre DOHC engine outputting 157 hp (117 kW) and the transmission is a 6-speed (fixed gears in sport mode) version of the CVT. In Australia, it was designated the CJ series and is initially available in ES, VR and VRX trims. The ES included cruise control, driver, passenger and knee airbags, stability and traction control as standard. The VR adds alloy wheels, foglights, side skirts, boot lip spoiler, rain-sensing wipers, automatic headlights, 6-disc CD changer, as well as curtain and side airbags.

Information provided by:

Wiring Information

The harness change in 2010 can be identified by the vehicles cluster:
pre 2010 models have the speedometer on the left and the tachometer on the right - use the FP9237K or CHMB6C
post 2010 models have these swapped around with the tachometer on the left and the speedometer on the right - use FP9037K or CHMB2C
both use exactly the same wiring but the control boxes are different.

For amplified vehicles the CHMB1C covers all years from 2007-2013

Speaker Cavities
Front door: 6-1/2"
Back door: 6-1/2"