Mitsubishi Outlander 2007-2012 ZG, ZH

Headunit Installation Requirements

You will need

Facia - Single DIN : 


Facia - Double DIN: 


Steering Wheel Control Harness: 

Required, also requires radio brand specific patch lead

Primary Harness: 

Required, may require a secondary harness

Antenna Adaptor: 

Not Required

Additional Products

T Harness (for adding aftermarket bluetooth car kits): 


Manufacturers headunits can vary slightly for this vehicle, please select yours for best results:

1. Pre 2010 Non Amplified

2. Post 2010 Non Amplified

3. Rockford Fosgate

4. Rockford Fosgate MMCS

About this Vehicle


Nov 2006 through Nov 2012


  • Mitsubishi



Chassis Type: 

  • 4x4

Place of Origin: 



  • 4x4
  • Outlander
  • ZG
  • ZH
  • Mitsubishi

Mitsubishi Outlander

The Mitsubishi Outlander is a crossover manufactured by Japanese automaker Mitsubishi Motors. On October 17, 2005, Mitsubishi launched the second generation model, dropping the Airtrek in Japan in favour of adopting the global name.

Information provided by:

Wiring Information

The harness change in 2010 can be identified by the vehicles cluster:
pre 2010 models have the speedometer on the left and the tachometer on the right - use the FP9211K or CHMB6C
post 2010 models have these swapped around with the tachometer on the left and the speedometer on the right - use FP9212K or CHMB2C
both use exactly the same wiring but the control boxes are different.

For amplified vehicles the CHMB1C covers all years from 2007-2012

Speaker Cavities
Front: 6-1/2"
Rear: 6-1/2"