Toyota Prius 2004-2008

Headunit Installation Requirements

You will need

Facia - Single DIN : 


Facia - Double DIN: 


Steering Wheel Control Harness: 

Required, also requires radio brand specific patch lead

Primary Harness: 

Required, may require a secondary harness

Additional Products

T Harness (for adding aftermarket bluetooth car kits): 

About this Vehicle


Jan 2004 through Jan 2008


  • Toyota

Chassis Type: 

  • Hatchback

Place of Origin: 



  • Toyota
  • Prius
  • Hatchback

Toyota Prius

The second generation Prius was completely redesigned as a mid-size liftback, sized between the Corolla and the Camry, with redistributed mechanical and interior space significantly increasing rear-seat legroom and luggage room. In late 2005 (for the 2006 model year), Toyota introduced some minor cosmetic changes for the XW20, such as a slightly updated front-end, revised instruments, and repositioned rear seats.

Information provided by:

Wiring Information

To retain climate controls in this vehicle, a 68Ω resister is required. This is to bridge between pins 9 and 10 of the 20 pin connector. The wires in pins 9 and 10 are usually thin white and thin pink.

Speaker Cavities
Front: 6-1/2"
Rear: 6-1/2"