Keep your factory amplifier when changing to an aftermarket headunit.

AXTOMI2 Amplifier retention interface to suit Mitsubishi – various models

Description: 

The AXTOMI2 by Axxess Interface is an amplifier retention interface that allows the factory OEM amplifier to be retained in various Mitsubishi vehicles when upgrading to an aftermarket headunit. The interface retains audio balance and fade functions and provides handbrake, reverse trigger and speed sense outputs which are used when installing various aftermarket audio visual headunits. While the interface does include a harness specifically for various Mitsubishi Vehicles, it is not a complete plug and play solution, a number of wires need to be connected between the AXTOMI2 and the aftermarket headunit, it is recommended that wires are soldered for the best connection.

  • Note:
    • Amp Retention Interfaces vary between models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.
    • The aftermarket headunit requires Front & Rear RCA outputs.
Features: 
  • Retains the factory OEM amplifier in various Mitsubishi vehicles when installing an aftermarket headunit
  • Retains audio balance and fade functions and has an adjustable input gain
  • Provides handbrake, reverse trigger and speed sense outputs which are used when installing various aftermarket audio visual headunits
  • Fitted with a vehicle specific plug, no cutting of wires required in the vehicle
  • Hard wire installation between interface harness and aftermarket headunit harness is required
  • The aftermarket headunit requires front & rear RCA outputs
  • Micro USB updatable (cable not included)
Specs: 
  • INTERFACE TYPE: OEM AMP RETENTION
  • INSTALLATION TYPE:
    • VEHICLE CONNECTION: VEHICLE SPECIFIC PLUG
    • AFTERMARKET HEADUNIT CONNECTION HARD WIRE (SOLDERING RECOMMENDED)
  • HEADUNIT COMPATIBILITY: MOST MAJOR BRANDS OF AFTERMARKET HEADUNITS WITH FRONT & REAR RCA OUTPUTS
  • AV HEADUNIT OUTPUTS:
    • REVERSE TRIGGER
    • HANDBRAKE
    • SPEED SENSE (VSS)
  • INCLUSIONS:
    • AXTOMI2 INTERFACE
    • AXTOMI2 HARNESS (WITH 18 PIN AND 20 PIN VEHICLE PLUGS)
    • 14 PIN HARNESS WITH STRIPPED LEADS AND RCA JACKS
  • NOTE:
    • Amp Retention Interfaces vary between models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.
    • The aftermarket headunit requires Front & Rear RCA outputs.

Weight: 

0.20KG