GRV2F Video converter / video noise filter

GRV2F Video converter / video noise filter

The GRV2F is a differential to single ended video converter, designed for use when installing an aftermarket radio into a vehicle that uses a differential camera. It can also be used as a video noise filter in cases where the camera ground is on a different plane than the aftermarket radio, by eliminating the ground loop and fixing distortion such as horizontal lines in the video.

Find A Dealer Contact Us Product Manual

Additional Information

Description

The GRV2F is a differential to single ended video converter, designed for use when installing an aftermarket radio into a vehicle that uses a differential camera. It can also be used as a video noise filter in cases where the camera ground is on a different plane than the aftermarket radio, by eliminating the ground loop and fixing distortion such as horizontal lines in the video.

Features

  • Converts differential video signal to a single-ended composite video signal
  • Reduces/eliminates video noise (eg. scrolling lines)
  • Two wire power connection for simple installation
  • Easy to hardwire into the vehicle if required

Specifications

  • RCA CONNECTION:
    • RCA MALE: VIDEO OUT
    • RCA FEMALE: VIDEO IN (YELLOW VIDEO + / BLACK VIDEO -)
  • HARD-WIRE CONNECTION:
    • BLACK: GROUND NEGATIVE
    • RED: ACCESSORIES 12V+
  • NOTES:
    • It is very important that you connect the GRV2F ground wire to the aftermarket radio's ground wire. These two components sharing the same ground is critical to the noise filter feature.
    • The video input connector has 2 independent wires for when you are connecting to a factory reverse camera. The RCA end can be cut off and the harness wires connected directly to the vehicle.