These adaptors allow you to install an aftermarket amplifier to your factory head unit. These devices take the speaker level outputs from the head unit and reduce the signal to a level of which an aftermarket amplifier can use without overloading its inputs.

IRAD Wavtech ignition / remote generator with delay function

Description: 

The IRAD provides solutions to three very specific problems faced in today’s car audio installations. This easy to program device allows you to add a switched 12 volt output, a remote output with adjustable delay and a relay/solenoid control to overcome the issues created by vehicles with start/stop systems.

Features: 
  • Automatic 12V ignition detection and +12V output generation
  • Generated +12V remote output (direct or linked to IGN)
  • Stop-start relay/solenoid control mode
  • Independent adjustable IGN & REM turn-on/off delays
  • >750mA continuous current per output
  • Compact aluminium chassis with detachable mounting tabs
  • Locking detachable terminals
Specs: 
  • OPERATING VOLTAGE: 6V-18V
  • IGNITION DETECT THRESHOLD: >0.5V B+ CHANGE
  • REMOTE IN TRIGGER: >6V
  • IGNITION OUT:
    • VOLTAGE: >1V FROM B+
    • CONTINUOUS CURRENT: 750mA
    • PEAK CURRENT: <1.5A
  • REMOTE OUT:
    • VOLTAGE: >1V FROM B+
    • CONTINUOUS CURRENT: 750mA
    • PEAK CURRENT: <1.5A
  • IGNITION REMOTE MODE:
    • IGNITION OUT DELAY: TURN-ON: 0-5SEC, 1SEC STEPS (0 DEFAULT) / TURN-OFF: 0-10MIN, 1MIN STEPS (0 DEFAULT)
    • REMOTE OUT DELAY: TURN-ON: 0-5SEC, 1SEC STEPS (0 DEFAULT) / TURN-OFF: 0-5SEC, 1SEC STEPS (0 DEFAULT)
  • RELAY CONTROL MODE:
    • IGNITION OUT: TURN-ON: 0-5SEC, 1SEC STEPS (0 DEFAULT) / TURN-OFF: 0-10MIN, 1MIN STEPS (3MIN DEFAULT)
    • REMOTE OUT: TURN-ON: N/A (BY ENGINE OFF DETECT) / TURN-OFF: N/A (SAME AS IGNITION OUT)
  • CURRENT DRAW:
    • MAX: <1.6A (CONT.)
    • IDLE: <2.6MA
  • DIMENSIONS:
    • CHASSIS ONLY: 20x38x37.7mm
    • INCLUDING TABS: 22x38x61mm

Weight: 

0.10KG