These adaptors allow you to install an aftermarket amplifier to your factory head unit. These devices take the speaker level outputs from the head unit and reduce the signal to a level of which an aftermarket amplifier can use without overloading its inputs.

LINKT Wavtech 2-channel line driver / line output converter with digital time alignment

Description: 

You've just installed a new audio system, but something isn't quite right. No matter how hard you try, you just can't get the image positioned where you want it. Another common problem occurs in systems with multiple subwoofers, powered by multiple amplifiers. Issues with phasing can create a loss in bass output.

The "Patent Pending" linkT provides a simple solution to these dilemmas. Using DSP Time Alignment technology, each dial represents a digit in the range of milliseconds (ms) of delay available. All dials in the maximum position equal 9.95ms of delay. The minimum increment of adjustment is .0625ms. 1 ms is equal to approximately 0.34m. If all this sounds confusing, don't worry. It Differential-Balanced means you can control the time when the sound reaches your ears, so that any sound stage imaging or subwoofer phase problems are corrected.

Features: 
  • 2-Channel digital time alignment processor
  • 2-Channel line driver or line output converter (LOC)
  • Differential balanced inputs
  • Low impedance outputs
  • Independent variable gain adjustments with clip LEDs
  • Auto-turn on via DC-offset or audio signal detect
  • Generated +12V remote output
  • OEM load detect compatible
  • Selectable ground isolation
  • Detachable power/speaker terminals
  • Professional grade panel mount RCAs
  • Compact aluminium chassis with detachable mounting tabs
Specs: 
  • OUTPUT VOLTAGE (MAX): >10VRMS
  • OUTPUT IMPEDANCE: <50Ω
  • INPUT SENSITIVITY SPK/RCA: 2-20VRMS / 0.5-5VRMS
  • MAX INPUT VOLTAGE (SPK): 40VRMS
  • FREQUENCY RESPONSE: <10Hz - >44kHz
  • THD+N SPK/RCA: <0.1% / <0.05%
  • S/N SPK/RCA: >95dBA / >95dBA
  • TIME DELAY RANGE: 0 TO 9.94MS (11.2FT/3.4M)
  • TIME DELAY INCREMENTS: 0.0625MS (0.85IN/2.1 CM), 1MS (13.5IN/34.3CM)
  • GENERATED +12V OUTPUT: >500mA
  • CHASSIS DIMENSIONS: 25x75x93mm

Weight: 

0.20KG