SWSU8C STEERING WHEEL CONTROL INTERFACE TO SUIT SUBARU - VARIOUS MODELS

SWSU8C STEERING WHEEL CONTROL INTERFACE TO SUIT SUBARU - VARIOUS MODELS

The Aerpro SWSU8C Steering Wheel Control Interface (SWC) allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls. Engineered to suit various Subaru vehicles, the steering wheel control interface includes a harness that is fitted with a vehicle specific plug designed to connect directly into the existing wiring in the vehicle with ease, no cutting of the factory wiring harness in the vehicle is required. Installation of the aftermarket head unit is simplified even further when paired with the optional Aerpro APP8 Head Unit Secondary ISO Harness, which connects between the aftermarket head unit and the Aerpro Steering Wheel Control Interface. This interface also provides a Reverse Trigger Output.

  • Please Note:
    • Steering Wheel Control Interfaces vary between models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.
    • Aftermarket head unit must be SWC compatible and Steering Wheel Control Functions may vary from the OEM Functions.
    • Not suitable for vehicles with OEM Harmon Kardon Amplified Systems.
    • Does not retain factory camera or AUX in.
    • Dipswitch #6 ON (Down) is configured for vehicles using Toyota codes (default setting): Forester (2012 - 2014), Impreza (2012 - 2014), WRX (2014 - 2015) & XV (2012 - 2014).
    • Dipswitch #6 OFF (Up) is configured for vehicles using Subaru codes: Forester (2015 - 2018), Impreza (2015 - 2016), Outback (2015 - 2018) WRX (2016 - 2018), Outback (2007 - 2014), Levorg (2015 - 2018) & XV (2012 - 2017).
Find A Dealer Contact Us Product Manual

Additional Information

Description

The Aerpro SWSU8C Steering Wheel Control Interface (SWC) allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls. Engineered to suit various Subaru vehicles, the steering wheel control interface includes a harness that is fitted with a vehicle specific plug designed to connect directly into the existing wiring in the vehicle with ease, no cutting of the factory wiring harness in the vehicle is required. Installation of the aftermarket head unit is simplified even further when paired with the optional Aerpro APP8 Head Unit Secondary ISO Harness, which connects between the aftermarket head unit and the Aerpro Steering Wheel Control Interface. This interface also provides a Reverse Trigger Output.

  • Please Note:
    • Steering Wheel Control Interfaces vary between models, to find the correct part for your vehicle use the Aerpro Vehicle Selector.
    • Aftermarket head unit must be SWC compatible and Steering Wheel Control Functions may vary from the OEM Functions.
    • Not suitable for vehicles with OEM Harmon Kardon Amplified Systems.
    • Does not retain factory camera or AUX in.
    • Dipswitch #6 ON (Down) is configured for vehicles using Toyota codes (default setting): Forester (2012 - 2014), Impreza (2012 - 2014), WRX (2014 - 2015) & XV (2012 - 2014).
    • Dipswitch #6 OFF (Up) is configured for vehicles using Subaru codes: Forester (2015 - 2018), Impreza (2015 - 2016), Outback (2015 - 2018) WRX (2016 - 2018), Outback (2007 - 2014), Levorg (2015 - 2018) & XV (2012 - 2017).

Features

  • Allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls
  • Increases driver safety by allowing you to keep your hands on the steering wheel and eyes on the road
  • Supports OEM Phone Button when connected to compatible aftermarket Bluetooth head units
  • Switchable between Toyota and Subaru steering wheel codes (default Subaru)
  • Not suitable for vehicles with OEM Harmon Kardon Amplified Systems
  • Provides an output feed for reverse gear
  • Fitted with a vehicle specific plug, no cutting of wires required
  • Optional button remapping available to customise your steering control button configuration (requires programming)
  • Recommended to be installed with an Aerpro APP8 Headunit Secondary ISO Harness (sold separately)

Specifications

  • INTERFACE TYPE: ANALOGUE
  • PATCH LEAD TYPE: SW
  • PHONE BUTTON COMPATIBILITY: YES
  • VOICE ASSISTANT BUTTON SUPPORT: YES
    • If your steering wheel control does not have a Voice Assistant button, the answer button will function as voice support instead.
    • Aftermarket head unit and phone must also support Voice Assistant feature for this feature to work
  • OUTPUTS:
    • REVERSE TRIGGER: YES (PURPLE WITH WHITE STRIPE)
    • PARK BRAKE: NO
    • SPEED PULSE: NO
    • ILLUMINATION: NO
    • AMP REMOTE: NO
    • TELEPHONE MUTE: NO
  • OTHER RETENTION:
    • OEM AMPLIFIED SYSTEM: NO
  • NOTES:
    • Aftermarket head unit must be SWC compatible.
    • Suitable for listed vehicles that have OEM Navigation head units.
    • Not suitable for vehicles with OEM Harmon Kardon Amplified Systems.
    • Does not retain factory camera or AUX in.
    • Custom button remapping available, requires USB-C cable (sold separately) click here for remapping instructions
    • Dipswitch #6 ON (Down) is configured for vehicles using Toyota codes (default setting): Forester (2012 - 2014), Impreza (2012 - 2014), WRX (2014 - 2015) & XV (2012 - 2014).
    • Dipswitch #6 OFF (Up) is configured for vehicles using Subaru codes: Forester (2015 - 2018), Impreza (2015 - 2016), Outback (2015 - 2018) WRX (2016 - 2018), Outback (2007 - 2014), Levorg (2015 - 2018) & XV (2012 - 2017).

Manuals & Firmware

  1. swsu8c.pdf -