SWVL4C STEERING WHEEL CONTROL INTERFACE TO SUIT VOLVO - XC90 MOST 25 SYSTEM

SWVL4C STEERING WHEEL CONTROL INTERFACE TO SUIT VOLVO - XC90 MOST 25 SYSTEM

This Aerpro control harness allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls. Volvo steering wheel control interface with parking sensor retention for MOST 25 fibre optic vehicles allowing the retention of the OEM SWC, parking chimes and camera when fitting an aftermarket headunit.

IMPORTANT Failure to disconnect the vehicle battery prior to removal of factory headunit may result in an engine warning light being displayed. This would need to be cleared by a Volvo repair agent with the proper scan tool.

Find A Dealer Contact Us Product Manual

Additional Information

Description

This Aerpro control harness allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steering wheel controls. Volvo steering wheel control interface with parking sensor retention for MOST 25 fibre optic vehicles allowing the retention of the OEM SWC, parking chimes and camera when fitting an aftermarket headunit.

IMPORTANT Failure to disconnect the vehicle battery prior to removal of factory headunit may result in an engine warning light being displayed. This would need to be cleared by a Volvo repair agent with the proper scan tool.

Features

  • Allows you to upgrade to an aftermarket headunit whilst maintaining use of your factory steering wheel controls
  • Increases driver safety by allowing you to keep your hands on the steering wheel and eyes on the road
  • Supports OEM Phone Button when connected to compatible aftermarket bluetooth headunits
  • Provides output feed for reverse trigger, park brake and speed pulse
  • Fitted with a vehicle specific plug, no cutting of wires required
  • Recommended to be installed with an Aerpro APP8 Headunit Secondary ISO Harness (sold separately)

Specifications

  • INTERFACE TYPE: CANBUS & MOST 25 FIBRE OPTIC
  • PATCH LEAD TYPE: SW
  • PHONE BUTTON COMPATIBILITY: YES
  • VOICE ASSISTANT BUTTON SUPPORT: NO
  • OUTPUTS:
    • REVERSE TRIGGER: YES (PURPLE/WHITE)
    • PARK BRAKE: YES (GREEN)
    • SPEED PULSE: YES (PINK)
    • ILLUMINATION: NO
    • AMP REMOTE: NO
    • TELEPHONE MUTE: NO
  • OTHER RETENTION:
    • OEM AMPLIFIER: NO
    • OEM REVERSE CAMERA: YES
    • OEM AUX INPUT: NO
    • OEM USB INPUT: NO
    • OEM ANTENNA: NO
  • NOTES:
    • Suitable for vehicles equipped with rear parking sensors only.
    • Includes 2x MOST Loops to retain factory camera and bypass amplifier if available.
    • May require an extra MOST loop (Model: MOSTLOOP) if vehicle is fitted with CD Changer
    • To retain the factory middle display, connect to steering wheel control module and hide behind dash

IMPORTANT Failure to disconnect the vehicle battery prior to removal of factory headunit may result in an engine warning light being displayed. This would need to be cleared by a Volvo repair agent with the proper scan tool.

Manuals & Firmware

  1. swvl4c.pdf -