Jeep Grand Cherokee 2009-2011 WH

Headunit Installation Requirements

You will need

Facia - Single DIN : 


Facia - Double DIN: 


Steering Wheel Control Harness: 

Required, also requires radio brand specific patch lead

Primary Harness: 

Required, may require a secondary harness

Antenna Adaptor: 

About this Vehicle


Jan 2009 through Jan 2011


  • Jeep



Chassis Type: 

  • 4x4

Place of Origin: 



  • Jeep
  • Grand Cherokee
  • 4x4
  • WH

Jeep Grand Cherokee WH

The Grand Cherokee received a minor facelift for 2008. The bottom part of the headlights became rounded and High Intensity Discharge (HID) Headlamps with auto leveling were added and the lower portion of the front bumper became removable to increase the approach angle for off-road use. The 4.7 L was refined, now producing 305 hp (227 kW; 309 PS), and 334 lb·ft (453 N·m).

Information provided by:

Wiring Information

These vehicles do not have a switched 12v accessories wire in the factory harness. You will need to locate an accessories feed in the fuse box and wire up to the red wire in the APP018.
This does not retain factory amplifiers.

The CHCH3C will control the steering wheel control buttons on the back of the steering wheel, and the front buttons will control the vehicle menu.

Speaker Cavities
Front door: 6" x 9"
Back door: 6-1/2"