Landrover Discovery 1994-2004

Headunit Installation Requirements

You will need

Facia - Single DIN : 

Required

Antenna Adaptor: 

Not Required
Images
About this Vehicle

Dates: 

Jan 1994 through Jan 2004

Manufacturer: 

Chassis Type: 

Place of Origin: 

United Kingdom

Manufacturer Website: 

Tags: 

Landrover Discovery

The Land Rover LR4 is an offroad focused mid-size SUV, from the British car maker Land Rover.There have been four generations of the vehicle.

In 1994, many changes were made to the Discovery and reached some markets as "Discovery 2"; the 200Tdi and 3.5 L V8 engines were replaced with the 2.5 L 300TDi 4-cylinder and 3.9-litre Rover V8 engines, the 300Tdi introducing a Bosch electronic emissions control for certain models and markets. At around this time a stronger R380 gearbox was fitted to all manual models combined with the flexible cardan coupling GAJ-1 from SGF for more comfort. The newer models featured larger headlamps and a second set of rear lights in the bumper.

The Series II Discovery debuted in autumn 1998 and in the US in 1999, The interior and exterior was re-worked to be less utilitarian, but it was still similar to the Series I. Every body panel was new except the rear door outer skin. In @001, the Land Rover Series 2 received a make over. The "face-lift" models are easily identified by new "pocketed" headlamps which matched the Range Rover and face-lifted Freelander models as well as redesigned turn and brake lamps on the rear of the vehicle; the turn signals were moved from the bumper to the high side fixtures.

Information provided by: http://en.wikipedia.org/wiki/Land_Rover_Discovery

Wiring Information

headunit has standard ISO connecters. Any APP8 series Secondary harnesses will suit